Ceramic coating gives your car that incredible glossy finish, water beading, and long-term protection—but it’s not invincible. The way you wash a ceramic-coated car matters.
Here’s how to safely clean and maintain your coating, keep that deep shine intact, and extend the life of your protection.
🧊 Step 1: Use a pH-Neutral Pre-Wash
Ceramic coatings repel dirt—but contaminants still cling. Using a pH-neutral snow foam like Synergy helps lift:
✅ Dust and pollen
✅ Road film
✅ Salt or grime
All without degrading the coating.
💡 Let it dwell for 5–10 minutes, then rinse thoroughly.
🧴 Step 2: Choose the Right Shampoo
Avoid any shampoos with wax additives or degreasers. These can dull or interfere with the hydrophobic layer.
✅ Use a pure, pH-balanced shampoo like Quantum
✅ Ultra-slick to prevent micro-marring
✅ Won’t strip your coating’s performance
🧽 Step 3: Gentle Tools Only
Use a plush microfiber mitt and a proper drying towel.
✅ No old sponges
✅ No rough drying rags
✅ Use the two-bucket method to reduce dirt drag
💡 Work from top to bottom—don’t let wheels contaminate your mitt.
💦 Step 4: Dry Carefully and Protect
Water spots can still form on coated surfaces. Dry immediately with:
✅ A plush microfiber towel
✅ A blower, if you have one
Want to boost the shine between washes? Use a ceramic-safe detail spray or topper designed to recharge the coating’s properties.
🛒 Maintain It, Don’t Strip It
Using the wrong products will undo months (and hundreds of pounds) of protection. The Safe Wash Essentials Kit is completely ceramic-safe, with:
✅ Synergy Snow Foam
✅ Quantum Shampoo
✅ Ultra-soft drying microfiber
✅ No harsh chemicals